Edge Banding Machine T450
This model machine is most popular edge banding equipment for MDF, plywood and melamine panel and cabinet edge banding. It fix with full basic edge banding functions such as gluing, end trimming etc. The banding material can be PVC, Acrylic, ABS and veneer, Wood strip is also optional!
T450 Edge Banding Machine Functions: Gluing / End Trim / Fine Trim / Scraping / Buffing
|Edge Banding Tape Thickness||0.4-3mm|
|Panel Width||≥ 80mm|
|Working Air Pressure||0.6Mpa|
For all Leabon machines including edge banding machine, we give 1 year free warranty to customers.
You are welcome to arrange your workers to come to our factory to learn about the machine installation, operation and maintenance, that’s all free for you! We can also arrange engineer to come to your site for installation, operation and maintenance against your request and cost responsibility.
Within 1 year, if any problem from the machine itself, we can offer you free replacements against your video and photo proof. Not like others need your returning back of the problem parts. Save your time, save your cost!
Buy and use Leabon machinery with worry free!
Edge Banding Machine T-450 Main Features
1. Our edge banding machine use Taiwan Delta/Invt. frequency controller, insured the duration and precision of our banding machine.
2. PLC use Taiwan Delta brand, air cylinder use SCM from Japan, INNA liner track, Honeywell limitation switch, all key parts we choose market tested best brands to try to guarantee our machine performance and let our customers can enjoy to use our machines.
3. Independent electric lifting up and down system, simple and convenient.
4. Precise encoder control, high speed.
5. Special polishing structure, motor angle can be universal adjusted, make the PVC/Acrylic/ABS/Veneer band polishing and buffing to the best.
6. Glue spray clean system is optional, it’s good to remove the glue and dirty on MDF/Wood panel during edge banding process.
7. With such powerful functions and high efficiency, our edge banding machine price is very competitive. As professional edge banding machine manufacture and supplier from China, We give factory price direct to final customer, you buy, you save!
Pre-milling and End Trim
Equipped with double diamond blades, remove the possible waving texture on edge to achieve better edge banding affection.
Buffing and Gluing
The buffing device adopts cotton material polishing wheel to sand the finished edge band more smoothly.
Gluing facilities use special structure to evenly spread the glue on both banding panel and band, ensure a more solid adhesion force.
Fine Trim / Rough Trim and Scrapping
Fine and rough trim facilities are used to remove the extra material on band, it adopts mould automatically track and high frequency high speed motor, ensure the plain and smooth of work piece top and bottom parts.
Scraping units used to remove the texture which might happened during trim processing, guarantee the band to be smooth and plain.
Grooving is a optional function for edge banding machine. It’s used to slot out one groove on panel to install glass, back panel etc.