Woodworking Machine Tips

/Woodworking Machine Tips

July 2021

March 2021

Instructions for usage auto oil pump in edge banding machine

By |2021-03-31T09:59:45+08:00March 31st, 2021|Woodworking Machine Tips, 木工机械新闻及贴士|

This auto oil tank pump is for edge banding machine T-280, T-450, T-600, T-800 series Specification:Voltage: 220V Pressure: 10kg Power: 30W Here is instruction for use of auto oil pump: 1.This auto pump has lubrication, intermittent, setting functions [...]

January 2021

Brush Sanding Machine Solutions for Embossed Wooden Doors!

By |2021-02-03T14:13:31+08:00January 30th, 2021|Woodworking Industry News, Woodworking Machine Tips, 木工机械新闻及贴士|

In 2021, design will be the core and key that more furniture factories are pursuing. Category design will also become a major event. How to seize the mainstream design will become an important step in the industry this [...]

How To Get Perfect Edge Sealing In Low Temperature Winter

By |2021-01-20T15:19:42+08:00January 20th, 2021|Woodworking Machine Tips|

Perfect edge sealing plays a connecting role in the production of panel furniture. The edge sealing process is complicated, and if there is no rich operating experience, quality problems are easily appeared. With the arrival of winter, the [...]

December 2020

3 important factors that determine the quality of panel furniture: wood, surface, edge banding

By |2021-01-21T09:16:54+08:00December 24th, 2020|Woodworking Machine Tips, 木工机械新闻及贴士|

Furniture is the most important part of home improvement, and it also costs a lot. Therefore, furniture has become the focus of attention. 3 important factors that determine the quality of panel furniture: wood, surface, edge banding. The [...]

October 2020

Solution for poor dust suction effect of the edge banding machine during trimming

By |2020-10-22T14:24:57+08:00October 21st, 2020|Woodworking Machine Tips, 木工机械新闻及贴士|

At present, in view of the poor dust suction effect of the edge banding machine. During the trimming operation, the chip removal system has been revised and upgraded. Brief This project takes the edge banding machine usage [...]

August 2020

Technical analysis of the honeycomb panel production

By |2020-08-29T17:53:14+08:00August 29th, 2020|Woodworking Machine Tips|

Reminder: Honeycomb panel is a sheet made of two thinner panels glued on both sides of a honeycomb core material. The honeycomb core material can be made of kraft paper, aluminum sheet, surface impregnated with synthetic resin (phenolic, [...]

July 2020

Wood processing contains wood cutting ,wood drying,wood gluing and wood surface processing

By |2020-07-30T17:40:29+08:00July 30th, 2020|Woodworking Machine Tips|

Wood processing Wood processing is processing wood as raw material, mainly by mechanical or chemical methods, and its products still maintain the basic characteristics of wood. In the forest industry, the wood processing industry and the chemical processing [...]