木工机械新闻及贴士

/木工机械新闻及贴士

March 2021

5 steps on how to adjust disc modeling of fine trimming in edge bander

By |2021-03-31T12:12:01+08:00March 31st, 2021|木工机械新闻及贴士|

In furniture panel market, there are some deigners will make drilling holes, hinge holes before edge banding. We will recommend disc model to fix in trimming groups. There are some tips: [...]

Instructions for usage auto oil pump in edge banding machine

By |2021-03-31T09:59:45+08:00March 31st, 2021|Woodworking Machine Tips, 木工机械新闻及贴士|

This auto oil tank pump is for edge banding machine T-280, T-450, T-600, T-800 series Specification:Voltage: 220V Pressure: 10kg Power: 30W Here is instruction for use of auto oil pump: 1.This auto pump has lubrication, intermittent, setting functions [...]

January 2021

Brush Sanding Machine Solutions for Embossed Wooden Doors!

By |2021-02-03T14:13:31+08:00January 30th, 2021|Woodworking Industry News, Woodworking Machine Tips, 木工机械新闻及贴士|

In 2021, design will be the core and key that more furniture factories are pursuing. Category design will also become a major event. How to seize the mainstream design will become an important step in the industry this [...]

December 2020

3 important factors that determine the quality of panel furniture: wood, surface, edge banding

By |2021-01-21T09:16:54+08:00December 24th, 2020|Woodworking Machine Tips, 木工机械新闻及贴士|

Furniture is the most important part of home improvement, and it also costs a lot. Therefore, furniture has become the focus of attention. 3 important factors that determine the quality of panel furniture: wood, surface, edge banding. The [...]

October 2020

Solution for poor dust suction effect of the edge banding machine during trimming

By |2020-10-22T14:24:57+08:00October 21st, 2020|Woodworking Machine Tips, 木工机械新闻及贴士|

At present, in view of the poor dust suction effect of the edge banding machine. During the trimming operation, the chip removal system has been revised and upgraded. Brief This project takes the edge banding machine usage [...]