leabon03

/Mary Lin

About Mary Lin

This author has not yet filled in any details.
So far Mary Lin has created 20 blog entries.

March 2021

5 steps on how to adjust disc modeling of fine trimming in edge bander

By |2021-03-31T12:12:01+08:00March 31st, 2021|木工机械新闻及贴士|

In furniture panel market, there are some deigners will make drilling holes, hinge holes before edge banding. We will recommend disc model to fix in trimming groups. There are some tips: [...]

Instructions for usage auto oil pump in edge banding machine

By |2021-03-31T09:59:45+08:00March 31st, 2021|Woodworking Machine Tips, 木工机械新闻及贴士|

This auto oil tank pump is for edge banding machine T-280, T-450, T-600, T-800 series Specification:Voltage: 220V Pressure: 10kg Power: 30W Here is instruction for use of auto oil pump: 1.This auto pump has lubrication, intermittent, setting functions [...]

January 2021

Brush Sanding Machine Solutions for Embossed Wooden Doors!

By |2021-02-03T14:13:31+08:00January 30th, 2021|Woodworking Industry News, Woodworking Machine Tips, 木工机械新闻及贴士|

In 2021, design will be the core and key that more furniture factories are pursuing. Category design will also become a major event. How to seize the mainstream design will become an important step in the industry this [...]

December 2020

3 important factors that determine the quality of panel furniture: wood, surface, edge banding

By |2021-01-21T09:16:54+08:00December 24th, 2020|Woodworking Machine Tips, 木工机械新闻及贴士|

Furniture is the most important part of home improvement, and it also costs a lot. Therefore, furniture has become the focus of attention. 3 important factors that determine the quality of panel furniture: wood, surface, edge banding. The [...]

October 2020

Solution for poor dust suction effect of the edge banding machine during trimming

By |2020-10-22T14:24:57+08:00October 21st, 2020|Woodworking Machine Tips, 木工机械新闻及贴士|

At present, in view of the poor dust suction effect of the edge banding machine. During the trimming operation, the chip removal system has been revised and upgraded. Brief This project takes the edge banding machine usage [...]

August 2020

2020.9.7-10 Shanghai Internaitonal Furniture Machinery & Woodworking Machinery Fair

By |2020-09-01T10:23:08+08:00August 31st, 2020|Woodworking Industry News|

September 7-10, 2020 Shanghai Hongqiao National Convention and Exhibition Center Hall 7.1 D45 HOMAG will bring you High-end solutions for panel furniture production Software service complete solution Gathering wisdom and integration, leading technology The first international woodworking [...]

Technical analysis of the honeycomb panel production

By |2020-08-29T17:53:14+08:00August 29th, 2020|Woodworking Machine Tips|

Reminder: Honeycomb panel is a sheet made of two thinner panels glued on both sides of a honeycomb core material. The honeycomb core material can be made of kraft paper, aluminum sheet, surface impregnated with synthetic resin (phenolic, [...]

April 2020

What should be paid attention to in the quality of high solid wood panel?

By |2020-04-14T15:22:43+08:00April 14th, 2020|Woodworking Machine Tips|

Foreword: In recent years, in the manufacture of solid wood furniture, large-size workpieces are often made of solid wood narrow plates and small materials to make panels, which can not only ease the supply and demand of resources, [...]